Simulive vs live webinar vs evergreen vs on-demand, which fits?

cRUD Research TeamThe cRUD Company

11 min read

The simulive vs live webinar choice, like the choice between evergreen, on-demand and replay, comes down to three questions about whether the audience should be together at one time, whether the presentation is live or recorded, and how access should end. Live and simulive gather the audience at once. Replay, evergreen and on-demand let each viewer start on their own.

TL;DR

  • Live and simulive bring the audience together at a scheduled time, while replay, evergreen and on-demand let each viewer start independently.
  • Simulive plays a verified recording on one shared timeline while a live team runs the room.
  • Replay revisits a completed live webinar, evergreen runs a recording on a schedule and on-demand lets each viewer start a recording whenever they choose.
  • The larger risk in recorded delivery is losing who registered, who watched and when access should end.

Five webinar delivery modes, defined

A delivery mode is the way an audience receives a webinar, covering when each person starts, where the presentation comes from and how people take part. Each mode below builds on what a webinar is and how it works.

Live

A live webinar brings presenters and attendees together at a scheduled time. Hosts and speakers present in the moment, and the audience responds through questions, chat and polls. It suits sessions in which an immediate response matters.

Replay

A replay lets people revisit the recording of a webinar that has already run live. In cRUD Webinar this is secure replay, which gives eligible viewers hosted, controlled access tied to the original webinar record rather than a public link.

Simulive

Simulive, short for simulated live, plays a pre-recorded presentation at a scheduled time to an audience that watches together on one shared timeline. A live team moderates questions, chat and polls around the recording, so the room is live even though the presentation is not.

Evergreen

An evergreen webinar is a recording that runs repeatedly on a schedule, with each viewer starting on their own. Without a set end, an evergreen schedule can outlive the content it carries.

In cRUD Webinar, Evergreen is always bounded by a defined end. It is also different from a recurring live series, in which presenters return for separate live sessions.

On-demand

An on-demand webinar has no scheduled time. Each eligible viewer starts the recording whenever they choose. In cRUD Webinar, standalone on-demand begins with an uploaded, verified source, so it does not depend on a previous live session.

Webinar delivery modes compared, as cRUD Webinar separates them
ModeAudience startsSourceParticipationBest fit
LiveTogether, at a scheduled timePresenters in the momentLive questions, chat and pollsA shared moment where response matters
ReplayIndependently, after the live sessionThe completed webinar's recordingControlled playback tied to the original webinarCatch-up and review for registrants
SimuliveTogether, on one shared timelineA verified recording with a live teamLive moderation, questions, chat and pollsA repeatable presentation with a scheduled moment
EvergreenIndependently, within a bounded scheduleOne verified recording prepared for reuseA consistent recorded journeyRecurring demonstrations, onboarding and education
On-demandIndependently, whenever access permitsAn uploaded, verified recordingSelf-directed viewingRecorded learning that never ran live

Live and simulive look alike from the audience's seat, so the difference between them deserves a closer look.

Simulive vs live webinar, what is recorded and what stays live

The only element simulive changes is the source of the presentation. In both a simulive and a live webinar, the audience joins at a scheduled time, shares one moment and can ask questions, chat and answer polls while a team runs the room.

That one change costs flexibility. A live presenter can respond to the audience, follow a question into new ground or correct a point. A simulive presentation is fixed. It delivers the same approved content every time, and the live team answers questions around it.

Choose live when

  • The discussion should shape the session, as in a panel or an open question-and-answer session.
  • The content is new, still changing or depends on audience input.
  • The speakers are available and the session runs once.

Choose simulive when

  • The same approved presentation should reach several scheduled audiences.
  • A speaker cannot join every run.
  • Production quality must stay consistent, as in a controlled training launch.

Be open with the audience that the presentation is recorded. Simulive keeps a real shared moment, but it should not pass for a live speaker.

In cRUD Webinar, the webinar record keeps the pre-recorded source distinct from the live participation around it. Anyone who joins late or reconnects returns to the current shared position, not to the beginning.

In the remaining three modes, each viewer starts alone, and the risk moves from the presentation to the audience around the recording.

The real risk is losing the audience record, not the recording

When a team reuses a webinar recording, the failure to watch for is not the video. It is a recording that no longer knows who registered, who attended, who may watch and when access should stop.

A recording placed in a file store, or shared as a link, stops carrying that context. The consequences are practical.

  • Access spreads beyond the intended audience, because a link has no eligibility rule.
  • Access never ends, because nobody set a boundary.
  • Viewing cannot be tied to a person or account, so follow-up becomes guesswork.
  • A right to attend live quietly becomes permanent access to every later recording.

Each one is avoidable when the delivery mode carries its own source, timing and access rules. The choice of mode then becomes a decision about the audience, not only about playback.

Which delivery mode fits? A decision guide by scenario

Start from the outcome the webinar must deliver, then pick the mode whose timing, source and access rule match that outcome.

Choosing a delivery mode by scenario
ScenarioDelivery modeWhy it fits
A launch where audience questions should shape the discussionLivePresenters can respond in the moment.
Registrants missed the session and need to catch upReplayViewing stays tied to the original webinar and its access rules.
One approved demonstration for several scheduled audiencesSimuliveA consistent presentation, a live team and a shared moment.
Customer onboarding that repeats on known dates, then stopsEvergreenA bounded schedule in which each viewer starts independently.
Viewers in several time zones, within a set periodEvergreen with an availability windowEach viewer starts when it suits them, until the window closes.
A training recording that never ran as a live webinarOn-demandAn uploaded source that each eligible viewer starts alone.

For cases the table does not cover, three tests settle the choice.

  1. Together or alone. If the audience gains from being together, choose live or simulive (live when the content must respond, simulive when it must stay consistent).
  2. Where the source comes from. If each viewer starts alone, a completed live webinar points to replay, an uploaded recording points to on-demand and a recording that should run on a schedule points to evergreen.
  3. When access ends. Set the end before publishing. If the content will change each time, run a new live session rather than repeating an old recording.

The guide helps only if the platform keeps each mode's rules apart.

How cRUD Webinar keeps each mode attached to the webinar record

cRUD Webinar treats every delivery mode as a different route into the same webinar record, so the source, audience and viewing evidence stay connected in every mode.

One record

The source, audience, delivery and evidence stay connected across every mode.

Clear timing

Shared timelines and individual starts are treated as different experiences.

Bounded access

Replay and recurring delivery remain subject to explicit access and end rules.

Each mode keeps its own playback rule. Simulive follows one authoritative clock for the whole audience. Evergreen and on-demand give each viewer an independent start from the beginning.

Viewing is recorded as evidence without overstating it, so opening an on-demand page is not treated as completion. The detail for each mode is on the pages for secure replay and recorded content, Simulive webinars, bounded Evergreen campaigns and standalone on-demand webinars.

Compare the modes by audience timing, source and access rule.

cRUD Webinar delivery modes compared
Delivery modeAudience timingSourceBest use
LiveEveryone joins togetherPresenters in the momentDiscussion that should shape the session
Secure hosted replayEach eligible viewer starts laterRecording of a completed webinarGiving the original audience controlled access afterwards
SimuliveEveryone joins one shared timelineVerified recording with live moderationConsistent delivery with live questions, polls and chat
Standalone on-demandEach viewer starts independentlyUploaded and verified recordingSelf-directed viewing without a previous live session
Bounded EvergreenEach viewer starts inside a finite scheduleOne verified recordingRepeatable campaigns that always end

The pricing page holds the commercial entitlement for each mode. cRUD Webinar lets a team use live, secure replay, Simulive, standalone on-demand and bounded Evergreen without splitting the programme across separate tools.

Delivery mode and format are separate decisions

Delivery mode decides how people receive a webinar. Format decides how long and how deep the live session is, and the two are chosen separately.

cRUD Webinar offers three formats.

  • Microcast (1 to 30 minutes) is for one focused outcome, such as a demonstration or release update.
  • Webcast (1 to 60 minutes) is a standard business webinar with presentation and discussion.
  • Deepcast (1 to 120 minutes) is for workshops, training and technical deep dives.

Here Webcast is cRUD's name for a format, and it keeps questions, chat and polls. It is not the view-only broadcast the wider industry often calls a webcast. Microcast, Webcast and Deepcast describe increasing depth and duration, while the delivery mode decides how the audience receives the experience.

The two decisions combine. A 30-minute product demonstration can run as a live Microcast, then be offered as secure replay to eligible registrants who missed it once the recording is ready.

The formats and delivery modes page sets both choices side by side, and how long a webinar should be helps size the live session.

Three scenarios and their trade-offs

A regulated product update

Use a reviewed recording for the core explanation and keep moderated questions live. Simulive protects the approved message while preserving a real audience response path.

An expert roundtable

Use live delivery when the value comes from spontaneous discussion and the audience must be able to influence it. Rehearsal should focus on roles, boundaries and recovery rather than scripting every sentence.

A recurring training session

Use an on-demand or simulive core when the lesson should stay consistent, then add live office hours when learners need direct help. The programme can separate standard instruction from variable support.

The decision should also include failure handling. A live speaker may disconnect, a simulive asset may fail to start and a moderated question path may be unavailable. Define what the audience will see, whether the programme can continue usefully and which part must be rescheduled. Delivery mode reduces some risks while creating others. It does not remove the need for an operating plan.

After the session, review whether the chosen mode served the audience promise. Use questions, completion, replay and operator observations as evidence. Do not treat a smooth broadcast as proof that a more interactive format would have been unnecessary.

Summary

Three questions choose a webinar delivery mode. Should the audience be together, is the presentation live or recorded, and how should access end? Live suits a shared moment that needs response, and simulive a consistent presentation with a live room. Replay serves catch-up, evergreen serves bounded repetition and on-demand serves an uploaded recording.

Whichever mode you choose, keep the audience record, the access rule and the end date attached to the webinar. Then choose the format of the live session as a separate decision.

Frequently asked questions

What is simulive?
Simulive is a webinar in which a pre-recorded presentation plays at a scheduled time to an audience that watches together, while a live team moderates questions, chat and polls. In cRUD Webinar, it uses one verified recording on one synchronised timeline.
Is a simulive webinar the same as a live webinar?
No. The audience and the room are live in both, but in simulive the presentation is a recording whose content stays the same throughout the session. Choose live when the discussion should shape the content.
When should a recorded session have a defined end date?
Use an end date when the material, access or audience promise is tied to a particular period. Decide what people should see after that period ends.
What should a team confirm before promising a recorded session to an audience?
Confirm the delivery mode, source, access rules and plan. Test the viewer journey before announcing the session.

Live, Simulive, Evergreen or on-demand? Choose by audience behaviour.

Tell us how people should join and watch, and we will help select the right delivery mode.