How many attendees can a webcast support? Viewer limits by platform
cRUD Research TeamThe cRUD Company
The answer to how many attendees can a webcast support depends on the platform, its mode and your plan. Interactive webinar plans usually hold a few hundred to a few thousand people, while view-only audiences reach further. Webex Webinars lists a webcast view of up to 100,000, and Zoom Webinars lists up to 100,000 mainly view-only attendees. Size the event from expected registrations, not from the headline maximum.
TL;DR
- The capacity of a webcast depends on the platform, the mode and the plan, so one vendor can publish several limits.
- Interactive rooms usually hold fewer people than view-only webcast modes, which narrow what the audience can do.
- Platforms count different things (live attendees, registrants or credits), so check what each limit measures.
- cRUD Webinar holds up to 50, 100 or 200 attendees per included webinar by plan, and a place is reserved at registration.
cRUD Webinar is our product, so it leads this list; every competitor fact comes from the vendor's own site.
A webcast's capacity is more than one number
Capacity is a set of limits rather than one figure, and our guide to webcast vs webinar explains how a broadcast differs from an interactive session. Here, a webcast in lower case means the industry's broadcast to a large audience with limited interaction. A Webcast with a capital W is cRUD Webinar's interactive format of up to 60 minutes.
Four limits decide whether your audience fits.
People who reserve a place, including those awaiting approval.
People allowed inside the hosted room at the same time.
People watching on external streaming destinations outside the hosted audience record.
One vendor can publish several of these at once. Webex lists interactive webinars of up to 5,000 and a webcast view for up to 100,000. Meanwhile, eWebinar limits monthly registrants rather than live attendees, and Livestorm charges one credit per unique person per session.
How many attendees can a webcast support on each platform
Published limits on the platforms checked here mostly run from 50 attendees on an entry plan to 100,000 in a view-only webcast mode, and BigMarker's plan cards claim more.
| Platform | Plan or mode | Stated capacity | What the limit counts |
|---|---|---|---|
| cRUD Webinar | Start, Run, Scale and Event Pass | 50, 100 or 200 by plan, Event Pass up to 100 | Registrations, including those awaiting approval, and the live room |
| Webex Webinars | Interactive or webcast view | 5,000 interactive, up to 100,000 in webcast view | Attendees per webinar |
| Zoom Webinars | Webinars, Webinars Plus, Events | Up to 100,000 listed on all three, priced tiers from 100 to 5,000 | Attendees, mainly view-only |
| GoTo Webinar | Reach, Elevate, Complete | 500, 1,000 or 3,000 by plan, and webcast size depends on plan | Participants per webinar |
| BigMarker | Three webcast plans | Conflicting (up to 1 million on plan cards, up to 500,000 in plan table) | Live attendees (registrants unlimited) |
| ON24 | All packages | Not published | Not stated |
| Livestorm | Pro and Enterprise | 3,000 live attendees per event | Live attendees, billed by credits |
| eWebinar | Levels 1 to 3 | 1,000 to 5,000 registrants a month | Monthly registrants, not live attendees |
Prices and limits checked on 3 October 2026 on each vendor's own site.
Interactive plans cluster between a few hundred and a few thousand attendees. Figures above 5,000 come with view-only modes, managed services or plans quoted by sales. Where a vendor publishes conflicting figures, as BigMarker does, or none, as ON24 does, ask for the limit on your plan in writing.
For a fuller review, our comparison of five webcast platforms sets cRUD Webinar beside four large-audience alternatives.
How to size your audience before you choose a plan
Size the event from the registrations you expect, then estimate the live audience and leave headroom.
- Estimate registrations from your invitation list and past events.
- Check whether your platform counts registrations, live attendees or credits.
- Apply your own past attendance rate to estimate the live audience.
- Add headroom for late registrations.
- Decide whether the audience needs to take part or only watch, because that sets the mode.
For illustration only, suppose you expect 400 registrations and half of your past registrants joined live. That suggests about 200 live attendees, but a platform that reserves a place at registration needs room for all 400. These figures are assumptions for the example, not a benchmark.
What to do when the audience outgrows the room
When the expected audience is larger than the room, change the mode, the session plan or the channel before you send invitations.
- Move to a view-only mode or a larger plan, with questions handled through a moderated channel.
- Ask about a managed service, such as GoTo's managed GoToWebcast service for up to 10,000 attendees as standard and 100,000 on a custom basis.
- Run the session more than once for separate groups, each with its own registration.
- Add a public live stream for people who only want to watch.
How cRUD Webinar counts capacity
cRUD Webinar sets capacity per webinar. Each included webinar holds up to 50 attendees on Start, 100 on Run and 200 on Scale, as the cRUD Webinar plans show. An Event Pass, a sales-issued allowance for one more Webcast of up to 60 minutes, starts at 100 attendees on any plan. The organizer can lower that limit but not raise it.
Capacity is reserved when someone registers, including a registration awaiting approval, while cancelled and rejected registrations do not hold a place. The live room has its own limit too. Attendee limits apply to each webinar separately, not to a pool shared across the rolling 30-day period, which is a moving window rather than a calendar month.
Replay works differently. Secure hosted replay begins on Run, and watching a replay is not a second registration, although a new viewer who must register for it can use one of the webinar's places.
For reach beyond the hosted room, Program Output can carry a live or Simulive webinar (one verified recording played on a shared timeline) to LinkedIn, YouTube, Facebook, X and custom RTMP or RTMPS destinations. The hosted room's capacity still follows the plan or Event Pass, and people on those platforms watch there rather than through your registration. The live production page shows where Program Output fits in a produced session.
The boundary is clear. cRUD Webinar Scale admits up to 200 registered attendees per webinar, and Program Output carries the same live or Simulive session to LinkedIn, YouTube and RTMP or RTMPS destinations when a wider public audience should watch. The plans and allowances documentation sets out each plan's limits in full.
A practical capacity worksheet
Start with the people who may actually watch at the same time, not the total size of the mailing list. Record the invited audience, expected registration rate, expected live attendance, likely peak concurrency and the number of people who need to speak or moderate. Keep each assumption visible so it can be replaced after the first event.
- Estimate the peak
Use recent programmes with a similar audience and purpose. If no history exists, plan a conservative range rather than one precise forecast.
- Separate viewers from operators
Hosts, speakers, moderators and support roles may use different capacity and permissions from the viewing audience.
- Choose the overflow rule
Decide whether registration closes, a waitlist opens, replay becomes the alternative or another session is scheduled.
- Test the full path
Exercise admission, moderation, audience delivery and recovery at the intended scale before the public session.
For example, a team expecting 650 registrations might plan for a peak of 420 viewers based on its own recent attendance pattern. That number is still an assumption. The team should confirm the chosen plan and delivery model against the current platform limits, allow operational headroom and define what attendees will see if demand exceeds the approved capacity.
Summary
How many attendees a webcast can support depends on the mode and the plan. Interactive rooms usually hold hundreds to a few thousand, view-only modes reach far higher, up to 100,000 on Webex Webinars and Zoom Webinars, and each limit may count something different.
Size the event from expected registrations and leave headroom. For sessions of up to 200 registered attendees where participation matters, cRUD Webinar's per-webinar limits fit, and for larger broadcasts Program Output reaches public destinations while the hosted room keeps its controlled audience.